York YMAA 0045 Installation Manual page 2

READ BEFORE PROCEEDING!
This equipment is a relatively complicated apparatus.
This equipment is a relatively complicated apparatus.
During rigging, installation, operation, maintenance,
During rigging, installation, operation, maintenance, or
service, individuals may be exposed to certain
or service, individuals may be exposed to certain
components or conditions including, but not limited to:
components or conditions including, but not limited to:
heavy objects, refrigerants, materials under pressure,
heavy objects, refrigerants, materials under pressure,
rotating components, and both high and low voltage.
rotating components, and both high and low voltage.
Each of these items has the potential, if misused or
Each of these items has the potential, if misused or
handled improperly, to cause bodily injury or death. It
handled improperly, to cause bodily injury or death. It is
is the obligation and responsibility of rigging,
the obligation and responsibility of rigging, installation,
installation, and operating/service personnel to identify
and recognize these inherent hazards, protect
and operating/service personnel to identify and recognize
themselves, and proceed safely in completing their
these inherent hazards, protect themselves, and proceed
tasks. Failure to comply with any of these requirements
safely in completing their tasks. Failure to comply with
could result in serious damage to the equipment and the
any of these requirements could result in serious damage
to the equipment and the property in which it is situated,
The following symbols are used in this document to alert the reader to specific situations:
The following symbols are used in this document to alert the reader to specific situations:
Indicates a possible hazardous situation
which will result in death or serious injury
Indicates a possible hazardous situation
if proper care is not taken.
which will result in death or serious injury
if proper care is not taken.
Indicates a potentially hazardous situation
Indicates a
which will result in possible injuries or
situation which will result in possible
damage to equipment if proper care is not
injuries or damage to equipment if
taken.
proper care is not taken.
External wiring, unless specified as an optional connection in the manufacturer's product line, is not to
be connected inside the control cabinet. Devices such as relays, switches, transducers and controls and
External wiring, unless specified as an optional connection in the manufacturer's product line, is not
any external wiring must not be installed inside the micro panel. All wiring must be in accordance with to be connected inside the control cabinet. Devices such as relays, switches, transducers and controls
Johnson Controls' published specifications and must be performed only by a qualified electrician. Johnson
and any external wiring must not be installed inside the micro panel. All wiring must be in
accordance with Johnson Controls' published specifications and must be performed only by a
Controls will NOT be responsible for damage/problems resulting from improper connections to the controls
or application of improper control signals. Failure to follow this warning will void the manufacturer's
qualified electrician. Johnson Controls will NOT be responsible for damage/problems resulting from
improper connections to the controls or application of improper control signals. Failure to follow
warranty and cause serious damage to property or personal injury.
this warning will void the manufacturer's warranty and cause serious damage to property or
personal injury.
2
Cooke Industries - Phone: +64 9 579 2185
IMPORTANT!
GENERAL SAFETY GUIDELINES
SAFETY SYMBOLS
SAFETY SYMBOLS
potentially hazardous
Email: sales@cookeindustries.co.nz
FORM NO.:6U6K-B01E-NB-EN
property in which it is situated, as well as severe personal
as well as severe personal injury or death to themselves
injury or death to themselves and people at the site.
and people at the site.
This document is intended for use by owner-authorized
This document is intended for use by owner-authorized
rigging, installation, and operating/service personnel. It
rigging, installation, and operating/service personnel. It is expected that these individuals possess independent
training that will enable them to perform their assigned
is expected that these individuals possess independent
tasks properly and safely. It is essential that, prior to
training that will enable them to perform their assigned
performing any task on this equipment, this individual
tasks properly and safely. It is essential that, prior to
shall have read and understood the on-product labels,
performing any task on this equipment, this individual
this document and any referenced materials. This
shall have read and understood the on-product labels, this
individual shall also be familiar with and comply with
document and any referenced materials. This individual
all applicable industry and governmental standards and
regulations pertaining to the task in question.
shall also be familiar with and comply with all applicable
industry and governmental standards and regulations
pertaining to the task in question.
Identifies a hazard which could lead to
damage to the machine, damage to other
Identifies a hazard which could lead to
equipment
damage to the machine, damage to other
pollution if proper care is not taken or
equipment and/or environmental pollution
instructions and are not followed.
if proper care is not taken or instructions
and are not followed.
Highlights additional information useful
Highlights additional information useful
to the technician in completing the work
to the technician in completing the work
being performed properly.
being performed properly.
Web: www.cookeindustries.co.nz
and/or environmental
JOHNSON CONTROLS