Related Manuals for Lumberjack AG820
Summary of Contents for Lumberjack AG820
- Page 1 SAFETY AND OPERATING MANUAL 820W Angle Grinder AG820 ORIGINAL INSTRUCTIONS Version 012020 AG820...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Welcome to Lumberjack! Dear Customer, Congratulations on your purchase. Before using the product for the first time please be sure to read these instructions for use. They provide you with all information necessary for using the product safely and to ensure its long service life. -
Page 3: General Power Tool Safety Warnings
A wrench or a key left c) Do not expose power tools to rain or wet attached to a rotating part of the power tool may conditions. Water entering a power tool will result in personal injury. increase the risk of electric shock. AG820... - Page 4 Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. AG820...
- Page 5 Wheels must be used only for recommended e) This safety guard is designed for applicati ons. For example: do not grind with the sanding/grinding. side of the wheel. Abrasive cut-off wheels are intended for peripheral grinding, side forces AG820...
- Page 6 11,000 rpm and a peripheral speed of 80 m/sec. k) Check the direction of rotation when you use diamond cutting wheels. The directional arrow on the diamond cutting wheel must point in the direction in which the tool rotates. AG820...
-
Page 7: Symbols & Cable Rating Chart
Caution! Risk of Injury! Do Caution! Wear ear defenders. The not reach into the running impact of noise can cause damage saw blade to hearing. Caution! Wear a dust mask. Class II Double Insulated AG820... -
Page 8: Machine Details And Product Features
No-load Speed – 11000rpm Quick release blade Grinding Wheel Size – Ø115mm guard 6. Lock button Spindle Thread – M14 7. Spanner Package Contents: 8. External flange with Angle grinder thread Side handle 9. Internal flange Protective cover Spanner Metal Grinding AG820... -
Page 9: Assembly
Allow the right-angle grinder to run in idle for at - The additional handle can be secured in any of least 1 minute with the grinding or cutting wheel three positions (A, B, C). fitted in place. Vibrating wheels are to be replaced immediately. AG820... -
Page 10: Operation
- Change the grinding or cutting wheel and tighten th e flange nut with the face spanner. Important! Only ever press the spindle lock when the motor and grinding spindle are at a stand-still! You must keep the spindle lock pressed while you change the wheel! AG820... - Page 11 Caution: Use the safety device for sanding/grinding (included in items supplied).For the best rough grinding results, hold the grin- ding wheel at an angle of between 30° and 40° to the workpiece surface and guide back and forth over the workpiece in steady movements. AG820...
-
Page 12: Maintenance And Service
2.Clean the outside of the tool with a soft cleaning cloth. 3.Do not use any chemicals, harsh abrasives, or solvents when cleaning plastic parts. General maintenance -All bearings are sufficiently lubricated for the life of the tool. -Speak to your supplier if internal maintenance is necessary. AG820... -
Page 13: Lumberjack Guarantee
Receipt. 2.3 If the Authorised Dealer who supplied the product to 1.2.3 If as ked to do so by Lumberjack or its Authorised you has been unable to satisfy your query, any claims made under this Guarantee should be made directly to dealer, you return the product at your own cost to Lumberjack. -
Page 14: Declaration Of Conformity
Old Heath Road, Wolverhampton, WV1 2RP. Tel: 01902 450 470 Declares that the ANGLE GRINDER(AG820) Is in compliance with the regulations included in the Directives:2006/42/EC EC DECLARATION OF CONFORMITY Certificate for EC-type examination delivered by TÜV SÜD Product Service GmbH. Zertifizerstelle , Ridlerstraße 65, 80339 München, Germany (Registration No.:M8A 18 06 42661 461) -
Page 15: Parts List
Spring washer Cord armor Gear Wood ruff-key Screw Spindle Front cap Inner Flange Spring washer Grinding wheel Screw Outer Flange Wheel Guard Wrench Screw End cap Clamp Roller Front handle Pinion Spring washer Housing Stator Washer AG820 AIR6V AIR6V AIR6V... -
Page 16: Parts Diagram
Parts Diagram AG820...
Need help?
Do you have a question about the AG820 and is the answer not in the manual?
Questions and answers