Safety Instructions - LaserLiner SuperLine 2D Operating Instructions Manual

Completely read through the operating instructions,
the „Warranty and Additional Information" booklet as
! well as the latest information under the internet link
at the end of these instructions. Follow the instructions
they contain.This document must be kept in a safe place
and if the laser device is passed on, this document must
be passed on with it.
Line laser for aligning work on all surfaces
– Exact alignment of horizontal/vertical surfaces and slopes
– 360° rotatable angle scale allows device to be tilted at any
angle
– Suitable for use on floors and walls
– Safe attachment with special pins without damaging surfaces
such as finishing coats, carpets, wood, veneered surfaces etc.
– Alternative: attachment with optional Laserliner ConTacts
adhesive stripes
– Strong magnetic clamps for attaching to metal surfaces
– Easy-to-read, illuminated spirit-level
General safety instructions
– Attention: Do not look directly into the laser beam!
– The laser may not get into the hands of children!
– Do not point this device unnecessarily toward persons.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its
functions fail or the battery charge is weak.

Safety instructions

Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they
should shut their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars) be used to look
at the laser beam or reflections.
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014/AC:2017
SuperLine 2D
07
EN