Appliances that are obviously damaged must not be operated. If you have any concerns regarding the performance and use of your appliance, please visit the Sunbeam website or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood.
Get to know your air purifier Control panel and features On/Off button Filter replacement indicator Turns unit on or off. Illuminates in red when it’s time to replace your filter. Timer Fan speed settings Sets a timer for 4, 8 or 12 hours. Adjusts the speeds between 1 (low), 2, 3 (high).
Features of your air purifier Getting started True HEPA filter Important notes: Installing the True HEPA filter Your air purifier features a True HEPA filter Your ioniser may produce an occasional 1. Turn OFF and unplug the air purifier. which removes up to 99.97% of airborne popping or cracking sound.
3. Rotate the knob counterclockwise to WARNING: Only use the original Sunbeam air purifier. NEVER use detergents, glass remove the cover and expose the filter UV Bulb model specially intended for this cleaner, furniture polish, paint thinner, or (Figure 1-2).
Make sure unit is turned ON. was purchased in New Zealand). Incorrect power adaptor Use the power adaptor that is supplied Upon receipt of your claim, Sunbeam will seek -servicing or modification of the product used. with the air purifier.
Page 7
0800 786 232 Newell Australia Pty Ltd. ABN 68 075 071 233 Sunbeam is a registered trade mark. Made in China to Sunbeam’s specification. Due to minor changes in design or otherwise, the product you buy may differ slightly from the one shown here.
Need help?
Do you have a question about the FRESH PROTECT SAP1000WH and is the answer not in the manual?
Questions and answers
Why does it stop working after about 20 seconds?