Sunbeam Simple Fresh SAP0900WH - Air Purifier Manual

Also See for Simple Fresh SAP0900WH:

User manual (5 pages)

Table of Contents

Contents

1 Sunbeam's Safety Precautions
2 Get To Know Your Air Purifier
- 2.1 BOTTOM VIEW
3 Control Panel & Features
4 Product Specifications
5 Getting Started
6 Operating Instructions
7 Care And Maintenance
8 How To Replace The Hepa Filter
9 Troubleshooting
10 Need help with your appliance?
11 Documents / Resources
- 11.1 References
- 11.2 Download manual

Sunbeam Simple Fresh SAP0900WH - Air Purifier Manual

Sunbeam's Safety Precautions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. These precautions include:

Read all instructions before using the appliance.
To avoid fire or shock hazard, plug the appliance directly into appropriate electrical outlet.
If the filter is covered by a bag when shipped, remove plastic bag before use and keep away from children.
Keep the cord out of heavy traffic areas. To avoid fire hazard, never put the cord under rugs, near heat registers, radiators, stoves, or heaters.
To protect against electrical hazards, do not immerse the appliance or use near water or other liquids.
This appliance is not intended for use by children or by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance. Keep the appliance and its cord out of reach of children.
Always turn the appliance off before unplugging it.
Always unplug the air purifier before moving or cleaning the unit, opening the filter chamber cover, changing the filters and whenever the unit is not in use. To disconnect the unit, be sure to pull the plug and not the cord.
Never drop or insert any objects into the openings of the unit.
Do not operate any appliance with a damaged cord or plug. If the motor fan fails to operate or the unit has been dropped or damaged in any manner, return appliance to manufacturer for examination and/or repair.
Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
Do not use outdoors.
Never place on a soft surface such as a bed or sofa as this could cause the unit to tip over and block the air inlet or outlet grilles.
Keep unit away from heated surfaces and open flames.
Do not place anything on top of unit.
Never use detergents, gasoline, glass cleaner, furniture polish, paint thinner or other household solvents to clean any part of the appliance.
This appliance should only be used in a room with temperatures between 10°C and 40°C.
o reduce the risk of fire or electric shock, do not use this appliance with any solidstate speed control device.
To prevent risk of electric shock, remove cord plug from outlet before opening appliance. To prevent risk of fire, inspect and clean equipment regularly as noted in this manual.

If you have any concerns regarding the performance and use of your appliance, please visit the Sunbeam website or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.

SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY

Get To Know Your Air Purifier

Get To Know Your Air Purifier - Part 1

BOTTOM VIEW

Get To Know Your Air Purifier - Part 2

Top Air Vent
Control Panel
Nightlight
360 Air Intake
True HEPA Filter Chamber Cover
Chamber Cover OPEN/CLOSE Button

Control Panel & Features

On/Off Button
A dual function button, turns unit on or off and selects Fan Speed Settings.

Fan speed settings

For optimum air filtration, it is recommended to operate the air purifier continuously on speed II (Medium). Its durable motor has been designed to give many years of use.
For quieter operation (such as in a bedroom), select speed I (Low).
When high levels of air pollution are present, select speed III (High) to quickly circulate and filter the air in the room.

Timer
For your convenience, you can set the air filtration time for 2, 4, or 8 hours. Once it reaches set time, the unit will automatically turn off. If you want to cancel the set time, simply press this button to cycle through until the light goes off.

Nightlight
The () illuminates when the nightlight feature is activated.

Filter Replacement Indicator
The ( ) starts blinking when it is time to replace the filter.

Product Specifications

CADR	Smoke: 153 m3/hr	Noise Level on High Speed	55dB(A) max
Fan Speeds	3	Power Consumption	38W

Getting Started

Gently place the air purifier on its side to expose the filter chamber cover.
Open the cover following the instructions in How to Replace the HEPA Filter. Pull the filter out of the air purifier and remove the plastic bag.
Insert the filter back into the unit and close the cover
Your unit is equipped with a True HEPA filter that will last for approximately 12 months..

Operating Instructions

Place the unit on a dry, stable and firm surface. Make sure not to block the top air vent and air intake grille.
Plug unit into appropriate electrical outlet.
Select desired fan speed setting: III (Hi), II (Medium) and I (Low) by pressing the ON/ OFF ( ) button to cycle through the speeds until it reaches desired speed setting.
Note: For optimum air filtration, it is recommended to operate the unit continuously on speed II (Medium). Its heavy-duty motor was designed to provide many years of use.
Always turn off and unplug the unit when not in use.

Care And Maintenance

Before cleaning the air purifier, turn off and unplug. Clean the exterior surface with a clean, damp cloth.
The top air vent can be cleaned of dust with a small, soft brush. If you would like to clean the inside of the filter compartment, ONLY use a dry, soft cloth to wipe it down.

Do not allow moisture to come into contact with the main housing of the air purifier.
NEVER use detergents, gasoline, glass cleaner, furniture polish, paint thinner, or other household solvents to clean any part of the appliance.

How To Replace The Hepa Filter

It is recommended to replace the True HEPA filter every 8-12 months.

The Filter Replacement Indicator light ( ) starts blinking when it is time to replace the filter. Turn off and unplug air purifier. Replace the HEPA filter with a new one.
To replace:
1. Gently place the air puri er on its side to expose the lter chamber cover. Push the Button toward arrow direction to unlock and open the cover.
2. Pull the used HEPA lter out and insert a new one.
Close and lock the cover. Place the air purifier on a flat surface.
Plug the unit into an electrical outlet. Reset the Filter Replacement Indicator by pressing and holding the On/Off ( ) and Timer () buttons simultaneously for 3 seconds until you hear a beep and the light goes off.

*Replacement filters (SAPF0900) can be purchased through local service centres.

Troubleshooting

Problem	Solution
Why is my unit not working?	Check if unit is properly plugged in and outlet is working. Make sure unit is turned ON. Make sure the filter is properly installed.
Why is there a decrease in air flow?	Make sure nothing is blocking air intake grille and filtered air outlet. Check condition of the filters and replace if necessary. Check filter to remove any plastic wrapping/ packaging.
Why is the unit making a loud noise?	Make sure the unit is firmly positioned in place. Open filter chamber cover and verify that any plastic packaging was removed from the filter.