Passing On The Product For Reuse; Storage; Disposal - Dietz Tomtar VFG User Manual

Quad cane
Table of Contents

Advertisement

24
7 CARE AND MAINTENANCE

7.6 PASSING ON THE PRODUCT FOR REUSE

Your product is suitable for transfer to/reuse by
others. The number of times it can be reused de-
pends on the material wear conditions and the
functional capabilities of the respective product.
When passing on the product for reuse, please
remember to hand over all the technical docu-
ments necessary for safe handling and use to
the new user or the specialist retailer.

7.7 STORAGE

If you wish to store the product, ensure that it is
kept in a dry place protected against direct,
strong sunlight and at a temperature of 0°C to
+45°C.
Make sure that there is no risk of the quad cane
falling over and its surfaces being damaged as a
result.
After longer periods of storage (> 4 months),
please check all the inspection points on the
product as listed in the maintenance schedule
before reusing/redeploying the product.

7.8 DISPOSAL

If you no longer need the product, please con-
tact your specialist retailer. They will then pick up
the product and either dispose of it properly or
make further use of it. Otherwise, please take
the product to your local waste disposal facility.
DIETZ GmbH // User manual for TOMTAR VFG // Version 1.0.0 EN
Before it is reused, the product must be cleaned,
disinfected, checked for damage and approved
by a specialist retailer.
As part of this, all the inspection points listed in
the maintenance schedule must be checked on
the product.
WARNING
Do not store the product near a heat source and
do not place any objects on the product during
storage.

Advertisement

Table of Contents
loading

This manual is also suitable for:

200380

Table of Contents