Technical Data - Yard force LS C13 Original Instructions Manual

20v pruning saw
Table of Contents

Advertisement

SYMBOLS
Warning symbols on the charger
To reduce the risk of injury, user must read the
instruction manual carefully.
The charger is for indoor use only.
Double insulation
WEEE symbol. Waste electrical products should
not be disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or local store for recycling advice.
The product complies with the applicable
European directives and an evaluation method of
conformity for these directives was done.
T3.15A
Protective 3.15 A limited
A product placed on the United Kingdom market
meets the UKCA Marking requirements
22

TECHNICAL DATA

Model
Mains voltage
No load chain speed
Cutting diamater. Max.
Sound pressure level: L
pA
Sound power level: L
wA
Vibration front handle
Weight:
Battery pack model
Capacity
Charger model
Input
Output:
The vibration emission level stated in this instruction manual has been measured in
accordance with a standardized test given in EN 60745; it may be used to vibration when
using the tool for the applications mentioned.
• using the tool for different applications, or with different or poorly maintained accessories,
may significantly increase the exposure level
• the times when the tool is switched off or when it is running but not actually doing the job,
may significantly reduce the exposure level.
Protect yourself against the effects of vibration by maintaining the tool and its accessories,
keeping your hands warm, and organizing your work patterns.
LS C13
20 V
3,2 m/s
110 mm
83.1 dB(A)
94.1 dB(A)
2,045 m/s
1,64 kg
B0P-SP07-20ZN
20 V
, 2,0 Ah
VDE: B0Q-SP06-20ZA
BS: B0Q-SP06-20ZB
230–240 V~, 50/60 Hz
21 V
, 2,4 A
23
2

Advertisement

Table of Contents
loading

Table of Contents