Related Manuals for Yard force LS C13
Summary of Contents for Yard force LS C13
- Page 1 LS C13 20V PRUNING SAW Original Instructions READ & UNDERSTAND INSTRUCTION MANUAL Save all warnings and instructions for future reference.
-
Page 4: Table Of Contents
INTENDED USE LS C13 Original Instructions The one hand power saw has been exclusively designed for cutting branches. The saw is not intended for continuous commercial use. The intended use also includes an operation following the operating instructions. CONTENT In conjunction with the extension handle ,the One hand power saw can be used as a pruner for cutting branches. -
Page 5: General Safety Warnings
GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS Safety of persons Electrical safety 1. Be careful, pay attention to what you are doing and 1. The connector plug for the power tool must fit in the approach work with a power tool in a reasonable socket. - Page 6 GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS 7. If there is an option for installing dust suction devices 5. Maintain power tools and insertion tools with care. and dust containers, these should be attached and Check to make sure that the moving parts are used correctly.
- Page 7 GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS 2. Only use the rechargeable batteries designated for Service 1. Only have your power tool repaired by a qualified use in power tools. Using other rechargeable batteries professional and only with original spare parts. may result in injury and a risk of fire.
-
Page 8: Product Safety Warnings
PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS Safety instructions for the saw • Carry the saw by the handle with the saw switched • Keep all parts of the body away from the saw chain off and away from your body. When transporting or when the saw is operating. - Page 9 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS safety devices built into your saw. As a saw user, you abilities are not allowed to use the One hand power should take several steps to keep your cutting jobs saw, unless they are supervised for their safety by free from accident or injury.
-
Page 10: Symbols
PRODUCT SAFETY WARNINGS SYMBOLS piece. Safety symbols • When sawing, the base plate must always face The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the against the workpiece. The saw chain can become explanations with them require your careful attention jammed and lead to loss of control over the machine. - Page 11 SYMBOLS SYMBOLS Read the instructions for use before use! Guaranteed sound power level value is 97 dB. Wear suitable protective gloves. Warning symbols on the battery pack To reduce the risk of injury, user must read the Wear protective goggles. instruction manual carefully.
-
Page 12: Technical Data
SYMBOLS TECHNICAL DATA Warning symbols on the charger Model LS C13 To reduce the risk of injury, user must read the Mains voltage 20 V instruction manual carefully. No load chain speed 3,2 m/s Cutting diamater. Max. 110 mm The charger is for indoor use only. -
Page 13: Description Of Product
Align the groove on the battery pack with the corresponding ribs in the receptacle of the device. Insert the battery pack with moderate force until it was locks in to place. WARNING: Only use Yard force 20V original battery pack! -
Page 14: Operation
OPERATION OPERATION To remove the battery pack from the tool (Fig. G) Work instructions Press the battery pack release button. Never reach over the riving knife or under the base plate. There is a risk of injury! Remove the battery pack from the tool. Do not cut if the saw chain is in contact with the workpiece, is in the workpiece or may hit an object. -
Page 15: Maintenance And Storage
OPERATION MAINTENANCE AND STORAGE Cleaning and maintenance Adjusting saw chain tension Risk of injury! CAUTION: Do not tighten the saw chain too much. Excessively high tension of saw chain Improperly handling the saw may result in injury. may cause breakage of saw chain, wear of the guide bar and breakage of the sprocket. CAUTION: A chain which is too loose can jump off the guide bar. - Page 16 MAINTENANCE AND STORAGE MAINTENANCE AND STORAGE Repairs WARNING: Before performing any repair work, always ensure that the battery pack There are no parts that can be repaired by the user inside the saw. If you identify damage, has been removed. contact a specialist workshop or qualified personnel.
-
Page 17: Declaration Of Conformity
Unit A&B Escrick Business Park Escrick, York YO19 6FD United Kingdom Declare that the product: Description: 20V Pruning saw Declare that the product: Model No. LS C13 Description: 20V Pruning saw Function: cutting wood Model No. LS C13 Function: cutting wood...