Infinity Classia Series Service Manual page 5

PSW310W subwoofer Classia Series
Parameter
Tx-Signal Sensing (ATO)
Auto-Turn-On (yes/no)
ATO Input test frequency
ATO Level LFE Input
Auto Mute/ Turn-OFF Time
Tx Features
LFE Input
Channel ID switch
External power supply
requirements
Power consumption
Tx Power supply
requirements
Tx Current consumption
Tx Standby Input Power
Tx Standby input current
Tx Idle Power
Tx Idle Power
Other Parameters/Notes:
Volume control should be at the input buffer stage in order to lessen the possibility of clipping the input section with highly dynamic audio material.
ALL SPECS SHOULD BE MEASURED AT NOMINAL LINE VOLTAGE.
QA Test
Specification Unit
Limits
YES functional
50 Hz functional
2 mV functional
5-15 minutes
--
YES -- functional
YES functional
18 VDC functional
18 V Reference
Amperes Reference
1 Watts Reference 120VAC line voltage
0.019 Amperes Reference 120VAC line voltage
2.34 Watts Reference 120VAC line voltage
1.64 Watts Reference 120VAC line voltage
Conditions
T before muting, after signal is
5-15
removed
4
Notes
Auto turn of time (T) must be 5 > T < 15
Minutes
Single RCA Connector
4 Position switch, to select wireless
channels
System provided with Power supply model
GPE-152, delivering 18VDC @ 500mA
RED LED
RED LED
Unit in operation Locked to Rx section
Solid GRN
Unit in operation NOT locked to Rx section