Table of Contents
Advertisement
Diverting Calls
This chapter describes the divert function.
About Diverting Calls
When supported by your service provider, you
can use the DivertLine menu to divert
(forward) your calls to another number, for
example your voice mail or home phone.
Note!
If your SIM Card and your service provider
support two lines, you need to set each line
separately. Here we assume you have one line.
The divert service lets you divert:
All calls:regardless of if your telephone is
turned on or off.
Unanswered calls: if you do not answer
within 30 seconds, if your phone is busy,
turned off or out of reach of a network.
LZT 126 1343/2 R1A
As a reminder, the display will inform you
about any activated call divert each time you
turn on the phone.
Your standby display now looks like this:
The DivertLine menu changes into DivertOff
when the divert is active.
Diverting
1. Select the DivertLine menu.
2. Select a divert option.
3. Chose Activate and press
.
YES
You may now do one of the following:
Enter a number at the prompt where you want
your calls to be diverted, including the area
code, and press
.
YES
Press the left arrow key to enter a name from
your phone book and press
YES.
Use the phone number that is suggested and
press
.
YES
You will only get a number suggested if you
have activated the divert function before.
There may be a short delay before the net-
work responds to your divert option, and
your display will prompt you when the divert
is active (on or off).
Viewing Status
of Call Divert
1. Select the DivertLine menu.
2. Select the divert option you wish to view and
choose GetStatus.
There may be a short delay before the net-
work responds, and your display will prompt
you which divert is active (on or off).
Cancelling Call Divert
1. Select the DivertLine menu.
2. Select the divert option you wish to cancel
and choose Cancel.
There may be a short delay before the net-
work responds, but you will be prompted that
your divert is cancelled.
17
Advertisement
Table of Contents
