ExPelec NICOLS MOOVE PAR 908 IP User Manual page 12

Manuel d'utilisation
Some tips for the lights:
1. Please be fully charged for first use,it will take 4 hours,but would be good for Battery.
2. About " Emergency Lamp " function,when set Emergency Lamp on,also light works with power
cable connection. If power cable is interrupted,leds will turn on white light. This feature suit to
special scenes
3. How to turn on the light?
A- when set "Auto power no", press "menu button" 3-5 seconds,will turn on the display.
B- when set "Auto power yes", it will turn on automatically when power cable plugged, disconnect
the power cable will turn off.
4. How to check power information, please set "battery show " to yes, then two ways.
A- when light on, you can see the info on the upper right corner of the display.
B- when light off, press the menu button lightly,will show it in display
5. How to set wireless DMX
There is status lamp on transmitter, it have 7 colors, corresponding to 7 wireless dmx channels in
light.
CH1>>RED, CH2>>GREEN, CH3>>RED+GREEN,
CH4>>BLUE CH5>>RED+BLUE CH6>>BLUE+GREEN CH7>>RED+BLUE+GREEN
How to connect with WiFi:
1.Scared the below QR code by phone, down load " LED WiFi " APP
2.Enter into " WiFi Mode " in the lights
3.Enter into " WLAN " of the phone, choose " LED_*** " ( *** means number )
4.Open " LED WiFi " APP to control.
MOOVE PAR 908 IP
12