Auto Select for
USB-C
Rename Inputs
Reset Input
Source
Allows you to set Auto Select for USB-C to:
• Prompt for Multiple Inputs: Always displays
the "Switch to USB-C Video Input" message
for you to choose whether to switch or not.
• Yes: Always switches to USB-C video input
(without asking) when the USB Type-C cable is
connected.
• No: Never automatically switches to USB-C video
input when the USB Type-C cable is connected.
Press the joystick to confirm the selection.
NOTE: The option is available only when Auto
Select is on.
Allows you to specify a preset input name for the
selected input source. The preset options are PC,
PC 1, PC 2, Laptop, Laptop 1, and Laptop 2. The
default setting is Off.
NOTE: When you perform a rename for the USB-C
input, the wattage value remains after the specified
option, e.g., PC 1
NOTE: It is not applicable for the input names shown
in the warning messages and Display Info.
Resets your monitor input settings to the factory
settings.
65W.
Operating the monitor
│
53