Temperature And Door Alarm; Temperature Alarm; Door Alarm - Miele KWT 6321 UG Operating And Installation Instructions

The appliance is equipped with an
alarm system so that the temperature in
both temperature zones cannot rise or
fall unnoticed, thus possibly damaging
the wine.

Temperature alarm

If the temperature in one of the wine
conditioning zones becomes too warm
or too cold, an alarm will sound. The
relevant temperature display will flash
at the same time.
The temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm or too cold.
Audible and visual signals will be
activated, for example,
– when the appliance is switched on
and the temperature in one of the
temperature zones differs greatly
from the set temperature,
– when too much warm ambient air
enters the cabinet when bottles are
being rearranged or taken out,
– when a large number of bottles are
stored for the first time,
– in the event of an interruption to the
power supply.
The alarm will stop and the temperature
displays will light up constantly when
temperature reaches the correct level
again.

Temperature and door alarm

Switching the temperature alarm off
early
If the noise disturbs you, you can
switch the alarm off if you wish.
^ Touch the sensor for switching off the
temperature alarm.
The alarm will stop.
The relevant temperature display will
continue to flash until the temperature is
at the correct level.

Door alarm

An alarm will sound if the appliance
door has been left open for longer than
approx. 60 seconds.
Switching the door alarm off early
If the noise disturbs you, you can
switch the alarm off if you wish.
^ Touch the sensor for switching off the
door alarm.
The alarm will stop.
27