Flex FX5471 Operator's Manual page 11

PIVOTING THE FAN (FIG. 4)
To adjust the fan angle, grasp the fan by the
carrying handle and tilt the fan head forward or
backward.
The fan can pivot within a range of 180°.
USB PORT (FIG. 5A & 5B)
The USB port can be used to charge a cell
phone or similar USB device (5 Volt DC, up to
2.1 A) when a battery pack is attached or the
jobsite fan is connected to an AC power supply.
NOTE: The USB port is not active all the time.
Before connecting a USB device to the port,
press the power-indicator button and the power
indicators will light up. This activates the USB
port and a USB device can be connected and
charged.
When charging a USB device, such as cell
phone, it can be placed into the cell phone
holders on either side of the fan.
ADJUSTMENTS
Fig. 4
Fig. 5a
Fig. 5b
Cell Phone Holder
-11-
180°
Power-indicator
Power-indicator Button
USB Port