Flex FX5471 Operator's Manual page 10

WARNING
performing any assembly, adjustments, or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
TO ATTACH/DETACH BATTERY PACK (FIG. 2)
a. To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
NOTICE: When placing the battery pack
onto the tool, be sure that the raised rib
on the battery pack aligns with the groove
inside the tool and that the latches snap into
place properly. Improper attachment of the
battery pack can cause damage to internal
components.
b. To detach the battery pack:
Depress the battery-release button located
USING EXTENSION CORD (FIG. 3)
CAUTION
used at the same time.
To operate the fan with AC power:
a. Turn off the control switch.
b. Open the AC power inlet cover.
c. Connect the power cord to the AC power inlet.
d. To disconnect the power cord, remove it from
the power inlet.
Detach the battery pack
from the tool before
The extension cord and a
battery pack cannot be
ASSEMBLY
Fig. 2
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the tool.
Fig. 3
AC Power Inlet
-10-
Detach
Attach
Power Cord