Esc D N - Epson TM-T60/T60P Operator's Manual

When n = < * * * * * * * 0 >
enabled.
When n
disabled.
- If the panel switches are disabled by this command, the
paper feed switch is disabled. Therefore, paper cannot be
fed with the paper feed switch.
n = 0

ESC d n

Print and feed paper
< 1B >
Prints the data in the print buffer and performs n line feeds.
- Sets the print starting position to the beginning of the line.
- The predetermined line spacing remains unchanged.
Not defined.
5-3 Miscellaneous Notes
ESC p m n1 n2
Generate pulse
< 1B >
m = 0
The pulse defined by n1 and n2 is output on connector
pin
- m is specified as follows:
m
0
1
l
l
not output a pulse.
=
< * * * * * * * 1 >
< 64 > < n >
H H
< 70 > < m >< n1 >< n2 >
H H
m .
Connector Pin
Drawer kick out Pin 2
Drawer kick out Pin 5
ON time is n1X2 msec, and OFF time is n2X2 msec.
If m is out of range, the printer reads n1 and n2 but does
- 4 0 -
, the paper feed switch is
8
, the paper feed switch is
8
n
lines