Adjusting The Paper-End Detector - Epson TM-T60/T60P Operator's Manual

3 -2 Adjusting the Paper-End Detector

n
The paper-end detector
The paper-end detector senses when the paper is nearing its end and
turns on the PAPER lamp.
The paper-end detector can be adjusted according the thickness of the
Paper.
n
How to adjust the paper-end detector
Roll paper may differ in spool size, so it may be necessary to adjust
the paper-end detector.
Use the specified paper roll with
and an outside diameter (d2) of 18 mm.
The thickness of the spool can
the paper-end detector adjustment.
Table 3-l. Adjustment Values of the Paper-end Detector
Adjustment Value Dimension of T (mm)
----------------------------------------------
.---------------------------------------------
---------------------------------------------
----------------------------------------------
----------------------------------------------
a cure
vary;
# l Approx. 0
Approx. 2
#2
Approx. 4
#3
Approx. 6
#4
#5 Approx. 8
#6 Approx . 10
d2
- 1 2 -
inside diameter (d1) of 12mm
use the table to determine