Table of Contents
Advertisement
INSTALLATION SPACE
- There should not be any heat source or steam
near the unit.
- There should not be any obstacles to the air
circulation.
- A place where air circulation in the room will be
good.
- A place where drainage can be easily obtained.
- A place where noise prevention is taken into
consideration.
- Do not install the unit near the door way.
- Ensure the spaces indicated by arrows from
the wall, ceiling, or other obstacles.
- The indoor unit must have the maintenance
space.
- For more information, refer to installation
manual.
CAUTION
!
In case that the unit is installed near the
sea, the installation parts may be corroded
by salt. The installation parts (and the unit)
should be taken appropriate anti-corrosion
measures.
INSTALLATION MANUAL
LIFTING METHOD
Use two or more people to lift and transport
the product.
CAUTION
!
• Do not have only one person carry
product if it is more than 20 kg.
• PP bands are used to pack some
products. Do not use them as a mean for
transportation because they are
dangerous.
• Do not touch heat exchanger fins with
your bare hands. Otherwise you may get
a cut in your hands.
• Tear plastic packaging bag and scrap it so
that children cannot play with it.
Otherwise plastic packaging bag may
suffocate children to death.
• When carrying in Outdoor Unit, be sure
to support it at four points. Carrying in
and lifting with 3-point support may
make Outdoor Unit unstable, resulting in
a fall.
• Use 2 belts of at least 8 m long.
• Place extra cloth or boards in the
locations where the casing comes in
contact with the sling to prevent
damage.
• Hoist the unit making sure it is being
lifted at its center of gravity.
11
Advertisement
Table of Contents
