Jasco 39723 Quick Start Manual

Jasco 39723 Quick Start Manual

60w smart dimmable led light bulb

Advertisement

Quick Links

60-Watt
Smart LED Light Bulb
Wirelessly control, schedule, or dim your
bulb from anywhere
Features
• Standard fit – Replace any standard A19 bulb with an E26 base to immediately turn
lamps, ceiling fans, recessed lights and more into smart devices.
• Full-range dimmability – The bulb adjusts brightness levels from 0-100 percent, which
reduces energy costs and improves bulb life.
• Long-life LEDs – Rated for up to 25,000 hours of use, long-lasting LEDs virtually elimi-
nates replacing bulbs for more than 22 years when used for three hours per day.
• Energy e cient – Using only 9W, the 60W-equivalent bulb o ers an estimated energy
cost of $1.09 per year, which saves approximately $140 over its life.
•Range extender – The dimmer repeats your Z-Wave signal from your hub or other
Z-Wave device to extend your range by up to 150ft. Extended signal range increases your
home automation coverage to enhance your control.
60W Smart Dimmable
LED Light Bulb
SKU#: 39723
See life in a new light with the Jasco Enbrighten
Z-Wave Smart LED Bulb. When paired with a
compatible hub, the smart bulb supports
ON/OFF/dim commands and programmed
settings. Wirelessly operate lamps, sconces, ceiling
lights and other fixtures that use standard A19
bulbs for e ortless management of your home.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 39723 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jasco 39723

  • Page 1 60-Watt Smart LED Light Bulb SKU#: 39723 Wirelessly control, schedule, or dim your See life in a new light with the Jasco Enbrighten bulb from anywhere Z-Wave Smart LED Bulb. When paired with a compatible hub, the smart bulb supports ON/OFF/dim commands and programmed settings.
  • Page 2 39723 PRODUCT OVERVIEW STANDARD FIT Wirelessly operate lamps, sconces, ceiling lights and other fixtures that use standard A19 bulbs for e ortless management of your home. Compatible with any standard A19 bulb with an E26 base to immediately turn lamps, ceiling fans, recessed lights and more into smart devices.
  • Page 3 39723 PRODUCT SPECIFICATIONS Z - Wave Enbrighten ® Smart LED Bulb Bulb: A19 Signal Frequency: 908.4/916 Range: Up to 150 feet from controller or closest Z-Wave device Operating Temperature: 32-104° F (0-40° C) Warranty: 2-year limited product warranty For indoor use only.
  • Page 4 To remove and reset the device Once the controller is ready to remove your LED smart bulb, turn subject to change without notice Distributed by Jasco Products Company LLC successful removal from the network. 10 E. Memorial Rd., Oklahoma City, OK To return to factory defaults ©Jasco 2018...
  • Page 5 39723 QUICKSTART GUIDE ® IMPORTANT! Please note that it is extremely important to follow the below practice or to use ONLY your preferred wireless remote control device to turn the smart bulb ON or OFF. Without electrical power to the light bulb, the smart bulb cannot be turned ON remotely nor function as a signal repeater to maintain proper Z-Wave network.
  • Page 6 39723 QUICKSTART GUIDE IMPORTANT! Veuillez noter qu’il est extrêmement important de respecter la pratique susmentionnée ou intelligente. Sans alimentation électrique vers l’ampoule, l’ampoule intelligente ne peut être allumée à distance ni fonctionner comme répétiteur de signaux servant à maintenir le réseau Z-Wave approprié.

Table of Contents