Jasco Energizer 38912 Quick Start Manual

Color-Changing Puck Lights
BATTERY INSTALLATION:
To open, turn back cover of puck light counterclockwise and remove. Insert 3 AA
batteries (noting polarity). To close, replace cover and turn clockwise.
IMPORTANT: Different types of batteries or new and used batteries should not be mixed. Exhausted batteries
should be removed from the fixture and disposed of properly.
OPERATION:
• 1st push on the lens turns ON the white LED light.
• 2nd push on the lens activates color-changing mode.
• 3rd push on the lens stops on the current color.
• 4th push on the lens turns the light OFF.
MOUNTING INSTRUCTIONS:
• Use included screws or double-sided tape to mount battery door where you want it.
• When installing using screws, screw through holes in battery door. Do not
over tighten.
NOTE: Battery door may remain mounted when changing batteries
READ IT OR WATCH IT
R -
ead instRuctions oR watch easy
- .
to follow video
s QR
can code oR visit
:// . /Bv3 9
https goo gl pz
MADE IN CHINA/HECHO EN CHINA
©2019 Energizer. Energizer and certain graphic designs are trademarks of Energizer
Brands, LLC and related subsidiaries and are used under license by Jasco Products
Company, LLC. All other brand names are trademarks of their respective owners. Neither
Jasco Products Company, LLC nor Energizer Brands, LLC is affiliated with the respective
owners of their trademarks.
Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7AM-8PM CST.
90-day warranty. Visit www.byjasco.com for warranty details.
WARNING
• BATTERIES MAY LEAK HARMFUL
LIQUIDS OR IGNITABLE MATERIALS
OR EXPLODE CAUSING INJURY AND
PRODUCT DAMAGE
• DO NOT MIX OLD AND NEW OR OTHER
BATTERY TYPES
• REPLACE ALL BATTERIES AT THE
SAME TIME
• REMOVE BATTERIES IF PRODUCT
IS TO BE UNUSED FOR EXTENDED
PERIODS OF TIME
38912 EnSp Manual v1
12/4/18 LH