Recalling Preset Stations; Changing Preset Stations - Emerson PD6850 Owner's Manual

RECALLING PRESET STATIONS

Press the POWER button to turn the unit ' On' and select the desired band. Press
<< / >>
the PRESET buttons inside the cassette key cover repeatedly to scroll
through the preset memories until the display shows the desired station.

CHANGING PRESET STATIONS

To change any preset station memory select the desired band and tune to the new
station you wish to memorize. Press the PROG/MEMORY button and then press
<< / >>
the PRESET buttons to display the memory number you wish to change.
Press the PROG/MEMORY button again to enter the new station in the memory.
The new station is memorized and the previous station is deleted from the memory.
13
PD6850_ib060203.p65 13 2/6/2003, 14:41