Table of Contents
Advertisement
DISC PLAY
1.) Insert a CD as described in the previous section and close the disc compartment.
2.) The display will then show the total number of tracks and total play time.
3.) Press the PLAY/PAUSE
play will begin from the start of the first
track of the disc.
4.) As each track on the CD disc is played, the corresponding track number will
flash in the Calendar display. The "OVER" indicator will appear if the disc in the
player contains more than 10 tracks.
TRACK
5.) A particular track can be selected using either of the CD Skip
If this is done before pressing the PLAY/PAUSE
with the selected track when the PLAY/PAUSE
6.) At the end of the disc, the unit will switch to stop mode.
NOTES:
• If the disc is deeply scratched, or too dirty, disc play may not start.
• If the disc is inserted incorrectly, or the disc is damaged the "no disc" indicator
will flash on display.
ES28_ib_0321.p65
button. Disc
POP
1
2
3
5
6
7
9
10
OVER
:
POP
12
12
POP
1
5
9
TRACK
:
4
CALENDAR
8
DISPLAY
/
button, disc play will start
button is pressed.
21/3/2002, 11:10
2
3
4
6
7
8
10
OVER
buttons.
Advertisement
Table of Contents
