TPG BizPhone T43U Quick Start Up Manual

TPG BizPhone
IP PHONE T43U
Quick Startup Guide
P a g e | 1 of 2
Confidential
Packaging Contents
The following contents are included in your T43U package:
Assembling the Phone
1. Attach the stand, as shown below.
2. Connect the handset and optional headset, as shown below.
Note: Headsets are to be purchased separately.
3. Connect the USB flash drive, as shown below.
Note: The USB ports can also be used to connect
other USB devices, such as EXP43, USB headset and
so on. We recommend that you connect Bluetooth
USB dongle or Wi-Fi USB dongle (purchased
separately) to the upper USB port and connect
EXP43 (purchased separately) to the lower USB port.
4. Connect the network and power, as shown below.
Note: You have two Power Options – AC or PoE. If
PoE is provided, you do not need to connect the
Power Adapter.
Startup the Phone
After the IP Phone is connected
to the network and supplied with
power, it automatically begins
the initialisation process.
After startup, the phone is ready
to use (pre-configured).