Preparation; Name Of Each Part Of The Projector - Eiki LC-X3/X3L Owner's Instruction Manual

PREPARATION

NAME OF EACH PART OF THE PROJECTOR

FRONT OF THE PROJECTOR
PROJECTION LENS
REMOVABLE
LENS COVER
REAR OF THE PROJECTOR
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
Observe the following when handling your
projector or choosing a location to install it.
Keep heat-sensitive objects away from the
exhaust port.
If you set the projector on top of a metallic
surface, the surface will become hot
because of the hot air exhaust. Be careful
when handling.
Do not touch the cabinet near to the
exhaust vent area, and especially screws
and metallic parts. These parts will become
hot while the projector is used.
This projector detects the internal
temperature and automatically controls the
operating power of the Cooling Fans.
BOTTOM OF THE PROJECTOR
INFRARED
REMOTE RECEIVER
SPEAKERS
INFRARED
REMOTE RECEIVER
AIR INTAKE VENT
LAMP COVER
MAIN ON / OFF
SWITCH
POWER CORD
CONNECTOR
AIR INTAKE
VENT
ADJUSTABLE FEET
CARRYING HANDLE
7