Cancan Domestic User Manual page 6

6
Put the half of the cut fruit on the strainer (18). (Figure 3).
Note: There is a locking system between the bowl (33) and the strainer (18) that prevents the
strainer (18) from rising during the squeezing process. Be sure that the strainer (18) is fully
seated in the bowl (33). (Figure 4).
Place the Bowl(33) into the Bowl Pool as in Figure 5.
Turn the Bowl (33) in directions as in Figure 6 and be sure that the bowl will be in the position as
in Figure 6.
Place the glass that will be filled with the juice, under the bowl. (Figure 7).
Caution: The dropper (35) is designed to collect the juice that is leaking from under the bowl
after the squeezing. Please put the dropper (35) under the bowl (33) after squeezing process.
(Figure 8).
Figure 7 Figure 8
Turn the products' arm (31) approximately 1,5 tour around towards yourself to squeeze the fruit.
After squeezing process, turn around the arm (31) in opposite and remove the fruit pulp from the
strainer (18).
Figure 4 Figure 5 Figure 6
Figure 3