Operation; Blade Selection - Echo SRM - 410U Operator's Manual

16
o
peratIon
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete
stop before removing obstructions, clearing debris, or servicing unit.
WARNING
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconscious-
ness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed
away from your face and body.
WARNING
Operation of this equipment may create sparks that can start fires around dry vegetation. This unit is equipped with
a spark arrestor and a spark arrestor may be required. The operator should contact local fire agencies for laws or
regulations relating to fire prevention requirements.

blade selectIon

WARNING
The type of Blade used MUST be matched to the type and size of material cut. An improper or dull blade can cause
serious personal injury. Blades MUST be sharp. Dull blades increase the chance of kick-out and injury to yourself
and bystanders.
TO USE
THESE BLADES
Handle
You
must
Debris Shield
install
Harness
these
parts!
Blade
Mounting
Hardware
* WARNING! DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL TRIMMERS
** Arbor diameter of Upper Blade Plate must match arbor diameter of metal blades.
*** New cotter pin required each time blade is installed.
**** Brushcutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a double shoulder harness
SRM/PAS/SB BLADE SET-UP GUIDE*
Pro Maxi-Cut Rigid Plastic
Grass/Weed Tri-Cut
Plastic Cutters Grass/Weed Blade
Loop Handle
Loop Handle, w/or
w/Barrier Bar,
w/o Barrier Bar
or U-Handle
Metal Shield Metal Shield
Shoulder Harness Shoulder Harness
Upper Plate & Upper Plate
Flat Washer & Glide Cup
Hex Nut Hex Nut
New Cotter Pin*** New Cotter Pin***
Metal
Metal 80T Brush Blade
Tri-Cut/8 Tooth
Metal 22T Clearing Saw Blade
Grass/Weed Blade
Loop Handle
w/Barrier Bar,
or U-Handle
Metal Shield Metal Shield
Shoulder Harness Shoulder Harness****
Upper/Lower Upper/Lower
Blade Plates** Blade Plates**
Hex Nut
New Cotter Pin*** New Cotter Pin***
U-Handle
Hex Nut