Tv-Out Options - DXG -568 User Manual

TV-Out Options

The TV-Out function on the camera allows you to transfer images directly to a TV.
To transfer the images, do the following:
1. Set the video output mode (NTSC/PAL) of the camera corresponding to your
TV standard. (The United States uses NTSC) Please refer to page 24.
2. Use the TV-Out cable provided to connect the camera to the TV. Turn on the
camera and use it normally. There will be no images/videos shown on the
LCD; all the images/videos and information will be shown on the TV screen
via the video output cable.
If the video cable is connected to the camera, the images will be no longer
shown on the LCD screen. If you want to restore the display status on the
LCD screen, disconnect the video cable from the camera.
Due to different TV sizing specifications, the sides
of the TV image will sometimes be cropped. This is
a normal.
54