Advertisement
All manuals and user guides at all-guides.com
Troubleshooting
instructions:
Troubleshooting instructions:
Troubleshooting
instructions:
1.Make sure the power is connected and turned on.
2.Make sure the converter Ethernet and fiber optic cables are
connected properly.
3.Check the connections according to the connection diagram.
4.Check the LED Indication status and identify possible problems
from the Indication LED table above.
Note:
Note:
Note:
1. Media Converter is a sensitive electronic item, please do
handle with extra care on delivery, shifting and humidity.
2. This unit will be warranty for 5 years.
3. Whenever there is a problem regarding the quality issue within
the warranty period, we will take the responsibility to repair with
free.
4. After the warranty period, we will charge accordingly
depending on the fault or damage.
5. Whenever there is a fault, you can contact our technical
support after you identify the problem and the alarm.
Common
Problems
Problems: : :
Common
Common Problems
1. 1. 1. PWR
PWR
power
supply
PWR power
power supply
supply indicator
Cause:
Cause:
Cause:
1. Power supply not properly connected
2. Protector tube damaged
3. Power input tie-line in reverse connection
4. Internal power supply circuit with failure
Solution: : :
Solution
Solution
1
. Check power switch and jack
2. Replace protector tube
3. Correct power supply line connection
4. Returned to the manufacturer for repair.
2 2 2 . . . FX
FX
Port
Link/Act
indicator
FX Port
Port Link/Act
Link/Act indicator
indicator lamp
Cause:
Cause:
Cause:
Optic fiber port link is fault.
Solution:
Solution:
Solution:
Your Serial and Data Communications Expert
indicator
lamp
not
lighting
indicator lamp
lamp not
not lighting
lighting
lamp
not
lighting
lamp not
not lighting
lighting
Shenzhen 3onedata Technology Co.,Ltd
Advertisement
