Cleaning And Maintenance - Philips S586 Manual

All manuals and user guides at all-guides.com
advise you to shave regularly (at
least 3 times a week) and exclusively
with this appliance for a period of 3
weeks.
Note: This appliance can only be
used without cord.
Shaving
Dry shaving
1
2 Move the shaving heads over
3 Clean the appliance after use (see
Wet shaving
For a more comfortable shave, you
can also use this appliance on a wet
face with shaving foam or shaving
gel.
To shave with shaving foam or
shaving gel, follow the steps below:
1
2 Apply shaving foam or shaving gel
3 Rinse the shaving unit under the
4 Switch on the appliance.
5 Move the shaving heads over
6 Dry your face.
7 Clean the appliance after use (see

Cleaning and maintenance

Cleaning the shaver under the
tap
Clean the shaver after every shave
for optimal performance (see
'Cleaning and maintenance'). Always
unplug and switch off the shaver
before you clean it.
Never use compressed air, scouring
pads, abrasive cleaning agents or
aggressive liquids such as petrol or
acetone to clean the appliance.
Be careful with hot water. Always
check if the water is not too hot, to
prevent burning your hands.
Never dry the shaving unit with a
towel or tissue, as this may damage
the shaving heads.
1
2 Turn the shaver up side down and
3 Open both shaving head holders
Switch on the appliance.
your skin in circular movements to
catch all hairs growing in different
directions (Fig. 11). Exert gentle
pressure for a close, comfortable
shave.
Note: Do not press too hard, as
this can cause skin irritation.
'Cleaning and maintenance').
Apply some water to your skin.
to your skin.
tap to ensure that the shaving unit
glides smoothly over your skin.
your skin in circular movements to
catch all hairs growing in different
directions (Fig. 11). Exert gentle
pressure for a close, comfortable
shave.
Note: Do not press too hard, this
can cause skin irritation.
Note: Rinse the shaving unit
regularly to ensure that it
continues to glide smoothly over
your skin.
'Cleaning and maintenance').
Note: Make sure you rinse all
foam or shaving gel off the
appliance.
Rinse the shaving unit under a
warm tap.
Note: You can also clean the
shaving unit with the cleaning
brush supplied (Fig. 12).
rinse the openings in the bottom
of the shaving head holders.
Switch on the shaver briefly
during rinsing (Fig. 13).
(Fig. 14).