Problem Areas
1.32 HandsFree by Wire
1.32.1 Connection to Portable
HandsFree fails
Check:
Inspect the Audio Jack.
Action:
If dirty or oxidized – clean it.
Check:
Inspect the BtB connector of the Audio Jack FPC to the
Main PBA.
Action:
1. If not properly connected – disconnect and reconnect.
2. If dirty or oxidized – clean both sides of the BtB
connector.
Check:
Inspect the contact pins on the Conn Audio Jack and the contact
pads on the Audio Jack FPC.
Action:
If dirty or oxidized – clean the pads and pins.
Check:
Inspect Audio Jack FPC.
Action:
1. If damaged – replace the Audio Jack FPC.
1265-6294 Rev 4
© Sony Mobile Communications AB – Company Internal
Troubleshooting Guide (mech)
51(59)