Device Casing; Qualification Requirements For Personnel; National And International Safety Regulations; Shielding Ground - Pepperl+Fuchs RocketLinx ICRL-U-8M12-G60 Manual

Table of Contents

Advertisement

ICRL-U-8M12-G60 Manual
Safety Instructions
Use the device in an environment with a maximum pollution degree that complies with the specifications in
the technical data. See Technical Data on Page 16 for more information.
Note: Operation of the device in high humidity or condensing atmospheres is exclusively allowed when using
recommended accessories with IP67 rating.

1.5. Device Casing

At ambient air temperatures > 140 °F (+60 °C): The surfaces of the device housing may become hot. Avoid
touching the device while it is operating.

1.6. Qualification Requirements for Personnel

Only allow qualified personnel to work on the device. Qualified personnel have the following characteristics:
Qualified personnel are properly trained. Training as well as practical knowledge and experience make up
their qualifications. This is the prerequisite for grounding and labeling circuits, devices, and systems in
accordance with current standards in safety technology.
Qualified personnel are aware of the dangers that exist in their work.
Qualified personnel are familiar with appropriate measures against these hazards in order to reduce the risk
for themselves and others.
Qualified personnel receive training on a regular basis.

1.7. National and International Safety Regulations

Verify that the electrical installation meets local or nationally applicable safety regulations.

1.8. Shielding Ground

The overall shield of a connected shielded twisted pair cable is connected to the ground connection on the
metal housing as a conductor.
Beware of possible short circuits when connecting a cable section with conductive shielding braiding.
6

Advertisement

Table of Contents
loading

Table of Contents