Table of Contents
Advertisement
ICRL-U-8M12-G60 Manual
Safety Instructions
1. Safety Instructions
1.1. Warning
UNCONTROLLED MACHINE ACTIONS
To avoid uncontrolled machine actions caused by data loss, configure all the data transmission devices
individually.
Before you start any machine that is controlled through data transmission, be sure to complete the configuration
of all data transmission devices.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
1.2. General Safety Instructions
Improper usage of the device entails the risk of physical injury or significant property damage. The proper and
safe operation of this device depends on proper handling during transportation, proper storage and installation,
and careful operation and maintenance procedures.
•
Before connecting any cable, read this document, and the safety instructions and warnings.
•
Operate the ICRL-U-8M12-G60 with undamaged components exclusively.
•
The ICRL-U-8M12-G60 is a potted device and there are not any serviceable components. In the event of a
failure, turn off the supply voltage and contact Pepperl+Fuchs for return procedures.
1.3. Certified Usage
Use the following guidelines:
•
Use the ICRL-U-8M12-G60 only for the application cases described in the Pepperl+Fuchs product
information, including this manual.
•
Operate the product only according to the technical specifications.
•
Connect to the product only components suitable for the requirements of the specific application case.
Operational environment:
•
On the inside of vehicles
•
On the inside of buildings
1.4. Installation Site Requirements
•
When you are selecting the installation location, make sure you observe the climatic threshold values
specified in the technical data.
•
Operate the device at the specified ambient temperature (temperature of the ambient air at a distance of 2
in (5 cm) from the device) and at the specified relative humidity exclusively.
5
Advertisement
Table of Contents
