HP Proliant DL140 Maintenance And Service Manual page 34

Hot-plug SATA/SAS hard drive cables
Figure 6 Hot-plug SATA/SAS HDD cable connections
Item Description
1 9-pin HDD LED cable connector
2 HDD 2 data cable connector
3 HDD 1 data cable connector
4 15-pin HDD power cable connector
Optical media drive
The optical media device bay supports the installation of a slim-type CD-ROM or DVD-ROM drive.
To install a CD or DVD drive:
1. Perform the pre-installation procedure.
2. Prepare the optical media device bay for installation.
Pull up the optical media device bay release lever, and then push the drive carrier partially
a.
out through the front of the chassis.
Pull the drive carrier out of the chassis.
b.
Remove the screw securing the drive carrier bezel.
c.
Detach the drive carrier bezel.
d.
Store the drive carrier bezel (with its screw) for reassembly later.
CAUTION: Do not discard the drive carrier bezel. If the optical drive is removed in the future, this
bezel must be reinstalled in the chassis for proper cooling of the system.
All manuals and user guides at all-guides.com
Contents 34