Global Light & Power LCC ARGI BL220271 Installation Instruction

INSTALLATION INSTRUCTION

Important Instructions. Please read first

•

Please follow instructions carefully. Failure to do so will void the warranty

local law and applicable standards.

Ensure correct input v oltage is supplied to the luminaire.

Ensure the power is disconnected before making any connections.

Do not make modification nor alter the luminaire without written approv al from GLP.

4. Ensure to keep luminaire in a clean area free of debris.

•

Step 1:

Find the location where the luminaire has to be installed. Install a suitable wiring ( armoured cable) from

the main supply (110-260V AC, 50/60Hz) to the luminaire.

•

Step 2:

Unscrew and remov e the bottom plate of the luminaire as illustrated.

•

Step 3:

Mount the bottom plate of the luminaire onto a hard surface using appropriate stainless steel

screws as illustrated. Maintain foundation height 50mm abov e the ground for softscape installation.

www.globallightllc.com

info@globallightllc.com

Please ensure installation complies with

Tel: +971 4 340 44 58

BL220271

Fax: +971 4 341 10 90

Table of Contents

Need help?

Do you have a question about the ARGI BL220271 and is the answer not in the manual?

Page 1 INSTALLATION INSTRUCTION BL220271 Important Instructions. Please read first • Please follow instructions carefully. Failure to do so will void the warranty Please ensure installation complies with local law and applicable standards. Ensure correct input v oltage is supplied to the luminaire. Ensure the power is disconnected before making any connections.
Page 2 • Step 4: Connect the luminaire input cable to the main supply (110-260V AC, 50/60Hz) using a waterproof KIT. Ensure the waterproof KIT is installed within 30cm from the luminaire as illustrated. Please make sure the earth (ground) wire is reliable. •...