NeuroTek Elite Advanced Tac Series Quick Start Manual page 8

C. Do you have a wireless headset? If yes, continue below, if not
continue to step D.
Ensure your headset is charged using either the USB
o
cord that comes with the headset of the AC adapter that
came with the Tac
Press the play/pause button on headset until the blue/
o
red light flashes
On your Tac, select Settings
o
Select Wireless Headset – it will automatically scan for
o
the headset
When the scan is finished, you should see NeuroTek.
o
Select NeuroTek – you should see a check mark – If you
don't see NeuroTek - rescan
Then Select Connect – And you should see OK next to
o
NeuroTek
Back out to the main menu and you should see
o
Headphones in your list of connected devices.
To turn off your headset, just press the pause play
o
➊ On/Off, Volume Up, and Volume Down
button until you hear a sound, which will let you know
it's powered off.
➋
©NeuroTek 2021
Volume Up Volume Down
Power On/Off
➊ On/Off, Volume Up, and Volume Down
➋
Bluetooth ® ON
light
Charging Port
Power On/Off
Version 2.0