Quick Start - NeuroTek Elite Advanced Tac Series Quick Start Manual

4

Quick Start

To begin session, hold the middle button for approximately 5
o
seconds to turn the device on.
Plug in your pulsers and or headset into the side of the Tac.
o
If you have an EyeScan or wireless devices see #4 of the
manual on how to pair the EyeScan or wireless headset to
the Tac. For wireless pulsers, see the manual for wireless
pulsers. If you don't you can continue to the next step.
On the main screen, you will see the words Resource (which
o
is slower speeds), and Reprocessing (which is higher speeds).
These are 2 preset profiles that you can use to get started.
You do have the ability to change the settings if needed.
Select which option you prefer. Once selected, the curser
will automatically go down to Start Session. Press the middle
button to select start session, and your session will begin.
Your pulsers, headset, and EyeScan will begin to work.
Once they are running, if you want to adjust the speed of
o
your devices, the volume of your headset, the settings on
the EyeScan, or the intensity of your pulsers, you will use
the arrows to select one of the icons in the middle of the
screen. There will be a square box around the icon once
it's selected. So, the hand is for pulsers, the headset, is for
your headset, the eye is for the EyeScan, and the last icon, a
clock is for speed. Once the box is around the one you want,
press the middle button to select it, and the options to adjust
the speed, volume, mode, or intensity will appear. Use the
arrows to make the adjustments that you want up or down.
©NeuroTek 2021 Version 2.0