Edit Profiles - NeuroTek Elite Advanced Tac Series Quick Start Manual

Edit Profiles

7
To edit the profiles, you would want to have all your
accessories (the pulsers, headset, and EyeScan, if applicable)
connected to the Tac in order to adjust the settings for all
devices. Once they are connected, you would follow the
following steps:
From the main menu, Select Profiles
o
You will then see Resource (which is set at slower
o
speeds) and Reprocessing (which is set at higher speed).
Select Edit next to the one you want to change, and then
select Start.
It will walk you through the settings for each device,
o
(pulsers, headset, and EyeScan if applicable).
Once completed, press Save and your changes should be
o
saved at this point.
From the main menu, select the profile that you made
o
changes to, Resource or Reprocessing and then Start,
and you should see the changes in your profile.
©NeuroTek 2021 Version 2.0