Start A Session - NeuroTek Elite Advanced Tac Series Quick Start Manual

5

Start A Session

A. Turn on Tac by holding the center power button for 5 seconds
B. Do you have an EyeScan? If yes, continue below. If no, see step C.
Ensure your EyeScan is turned on. On your Tac, Select
o
Settings, then select Wireless Devices. Your tac will
automatically scan for wireless devices. Once your device
is found, it will show up on your Tac. Select the device by
hitting enter and then a check mark will appear next to
the device. Arrow down and select connect. OK will appear
next to the device.
Select Back until you get back to the Main Menu
o
©NeuroTek 2021 Version 2.0