Sanyo SCP-6600 User Manual page 30

Hide thumbs Also See for SCP-6600:
Table of Contents

Advertisement

Setting a Start-up/Power-off Tone
To set a Start-up/Power-off tone:
1.
Select
2.
Select Start-up Tone or Power-off Tone.
3.
Scroll to your desired tone and press
Using Voice Prompt
This feature allows you to hear voice prompts when using Voice
Memo, etc. (default setting is Off).
To enable or disable voice prompt:
1.
Select
2.
Select On or Off.
Tip:
When ringer volume is set to "Silence All," voice prompts cannot be heard.
Setting Up Key Press Echo
With this feature, you can hear a voice say the numbers when you
press the keypad.
To turn Key Press Echo on or off:
1.
Select
2.
Select On or Off.
Adjusting the Phone's Volume Settings
To adjust your phone's volume settings:
1.
Select
2.
Select Ringer Volume, Calendar/Alarm, Start-up/Pw-off, or
Key Beep.
3.
Adjust a volume level by pressing the navigation key up or down
and press
To adjust the earpiece or speaker volume:
1.
Select
2.
Select either Earpiece or Speaker.
3.
Adjust a volume level by pressing the navigation key up or down
and press
28
> Settings > Sounds > Others.
> Settings > Sounds > Others > Voice Prompt.
> Settings > Sounds > Others > Key Press Echo.
> Settings > Sounds > Ringer/Key Vol.
.
> Settings > Sounds > Receiver Vol.
.
.
2. Your Phone's Settings

Advertisement

Table of Contents
loading

Table of Contents