Table of Contents
Advertisement
To Skip to the Beginning of Next Programme
1) Press
QUICK-FIND
.
To View at Normal Speed
1) Press
PLAY
/
. The Quick-Find is cancelled.
B
K
Note: •
This function will not operate in the Recording mode.
•
When you want to cancel the Quick-Find while in
progress, press
STOP
•
When the end of a tape is reached during the Quick-
Find, the tape will automatically rewind to the
beginning. After rewinding finishes, the VCR will
eject the tape and turn itself off.
INDEX SEARCH
• The index mark will be made automatically when
REC
is pressed. It will also be marked at the starting
I
point of Timer Recording and OTR.
• The index mark is not recorded if
pressed and released during recording.
• The time gap between index marks on the tape should be
greater than 1 minute for SP recording and 2 minutes for
LP recording.
• Use the remote control for this procedure.
1) Press
SEARCH
.
2) Press
PLAY
/
or
STOP
B
K
number of programmes that you want to skip appears.
3) Press
REW
/
or
h
{
The VCR begins rewinding or fast forwarding to the
beginning of desired programme.
When the preset programme is reached, the VCR will start
playback automatically.
Note: •
Index Search can be set up to 20.
•
This function will not operate in the Recording mode.
•
Operations must be followed up within 30 seconds
from steps
2)
to
3)
will be cancelled.
•
To exit the Index Search mode, press
STOP
or press
/
C
TIME SEARCH
If a tape includes both programmes recorded in the PAL
system and ones recorded in the NTSC system, this function
may not be operated correctly.
• Use the remote control for this procedure.
SEARCH
1) Press
twice.
2) Press
PLAY
/
or
STOP
B
K
desired time appears.
3) Press
REW
/
or
h
{
The VCR begins rewinding or fast forwarding to the
specified point.
When 0:00 is reached, the VCR will start playback
automatically.
Note: •
Time Search can be set up to 9 hours 59 minutes
(9:59).
•
This function will not operate in the Recording mode.
•
Operations must be followed up within 30 seconds
2)
3)
from steps
to
will be cancelled.
•
To exit the Time Search mode, press
or press
STOP
/
C
/
.
C
L
(PAUSE/STILL)
F
/
repeatedly until the
C
L
F.FWD
/
.
g
B
, otherwise the Index Search mode
MENU
3)
after step
.
L
/
repeatedly until the
C
L
F.FWD
/
.
g
B
, otherwise the Time Search mode
MENU
after step
3)
.
L
Copying a Video Tape
You can make copies of videotapes made by friends or relatives
for your own enjoyment.
WARNING:
• Unauthorized recordings of copyrighted video
tapes may be an infringement of copyright
laws.
Connect the recording VCR (this unit), playing VCR (another
VCR) and your TV as outline in the following diagram.
[Source (Playing) VCR <Monaural>]
(another VCR)
to 21-Pin
Scart Jack
is
1) Insert a pre-recorded videocassette into the playing VCR.
2) Insert a blank videocassette, or one you want to record
over, into the cassette compartment of the recording
VCR.
3) Press
SYSTEM SP/LP (SPEED)
select the desired recording speed (SP/LP).
4) Select "AV2" position on the recording VCR. See "Other
Connections" on page 5.
5) Press
REC
6) Begin playback of the tape in the playing VCR.
7) To stop recording, press
recording VCR, then stop playback of the tape in the
playing VCR.
Note: •
For best results during dubbing, use the VCR's front
in step
2)
panel controls whenever possible. The remote control
might affect the playback VCR's operation.
•
If video or colour fades in and out, you may be
copying a copy guarded video tape.
To Monitor the Recording
Turn on the TV and select the video channel on the TV.
A Status Display
To check the Counter, or Clock & Channel number, press
(ON SCREEN)
screen will change as illustrated:
When you select the channel using
the desired channel (position number).
<OFF mode>
Note: •
If the on screen display or indicators on the front panel
show an abnormal reading or no reading, unplug the
2)
in step
VCR for 2 minutes, then replug it again.
Please note that language, clock, and timer settings
will be cleared after disconnection.
13
(Use for monitoring)
AV2 (DECODER)
[Editing (Recording) VCR]
(this unit)
on the remote control to
on the recording VCR.
I
STOP
EJECT
/
. Each time you press
the Number buttons
<COUNTER mode>
■
SP
Press once.
Press once.
0:12:34
Press once.
[TV set]
to aerial
socket
RF cable
AV1 (TV)
(supplied)
AUDIO
OUTPUT
AERIAL
L
RF OUT
R
to RF OUT
/
on the
C
A
(ON SCREEN)
, TV
, select
<CLOCK and CHANNEL
NUMBER mode>
■
17:40
SP
P02
EN
Advertisement
Table of Contents
