Table of Contents
Advertisement
7) Press
PLAY
STOP
/
or
B
K
relevant end hour appears. Next, enter the minute digit.
8) Press
PLAY
STOP
/
or
B
K
relevant channel number appears.
9) Press
PLAY
STOP
/
or
B
K
desired tape speed appears.
10)Press
F.FWD
/
. Programme is now completed.
g
B
•To set another timer programme, repeat steps
11)Press
MENU
to exit.
12)Press
/I (STANDBY-ON)
The
indicator on the display comes on.
MENU
TIMER
SET UP
INITIAL
To Stop a Timer Programme which has Already
Started
STOP
EJECT
Press
/
/
C
A
Note: • STOP
/
on the remote control will not function in
C
L
the Timer Recording mode.
To Correct Timer Programmes
If you want to correct an automatic timer after you finished
setting programme,
1) Repeat steps
1)
3)
to
in the "Timer Recording" section on
page 11.
2) Select the setting you want to change using
REW
or
/
.
h
{
3) Enter the correct numbers using
STOP
/
, then press
C
L
4) Press
MENU
to exit.
5) Press
/I (STANDBY-ON)
mode.
To Cancel or Check the Start/End Time
1) Repeat steps
1)
2)
to
in the "Timer Recording" section on
page 11.
2) Select a programme number you want to check using
PLAY
STOP
/
or
B
K
C
programme appears on the TV screen. You may cancel the
entire programme by pressing
3) Press
MENU
to exit.
Avoid Overlap of TIMER Programmes...
A timer programme does not work while another programme
is under execution.
Programme 1
Programme 2
Programme 3
9:00
Hint for Timer Recording
• If there is a power failure or if the VCR is unplugged for
more than 30 seconds, the clock setting and all timer
settings will be lost.
• If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately, eject the tape and the
VCR power will be turned off. The
• If a tape is not in the VCR, Timer Recording cannot be
performed and the
indicator flashes. If an erase-
prevention tab of the tape is missing, the tape will be
ejected and the
indicator will flash. Please insert a
recordable tape.
/
repeatedly until the
C
L
/
repeatedly until the
C
L
/
repeatedly until the
C
L
to activate the timer.
TIMER NUMBER
DATE
START
END
CHANNEL
SPEED
on the VCR.
F.FWD
PLAY
/
or
B
K
F.FWD
/
.
g
B
to return to timer standby
/
. The details of selected
L
REW
/
.
h
{
10:00
11:00
indicator will flash.
• When all the Timer Recordings are completed, the
indicator also flashes. To play or eject the recorded tape,
press
/I (STANDBY-ON)
EJECT O
or
recorded programmes, press
• The TV that is connected to your VCR may be turned on
or off when the VCR is in the Timer Recording mode.
3)
to
10)
.
• The VCR will only perform a Timer Recording after it has
been placed into timer standby mode.
Auto Return
Using the AUTO RETURN Button
When all the Timer Recordings are completed (the
1
indicator flashes), press
--/--
--:--
VCR will rewind to the beginning of the recorded
--:--
--
programme(s).
--
Note: •
If there are any remaining programmes, press
/I (STANDBY-ON)
press
other button once and then press
"Auto Return" will not be carried out.
Using the VCR Menu
If there are any remaining programmes including Daily,
Everyday, & Weekly, "Auto Return" will not operate.
1) Press
MENU
2) Press
PLAY
"SET UP", then press
3) Press
PLAY
RETURN", then press
/
g
B
"ON" will appear next to "AUTO RETURN".
4) Press
MENU
Watch the Recorded Timer Programme
/I (STANDBY-ON)
Press
PLAY
/
B
K
Parents Lock
Parents Lock prevents use of the VCR by making the VCR
feature buttons on the VCR and the remote control
inoperative.
• The PWR indicator on the display comes on.
1) Press and hold down
control for 5 seconds until "PL" appears on the display.
The Parents Lock is activated.
When you want to cancel it, press and hold
/I (STANDBY-ON)
seconds.
When Parents Lock is activated:
• The time will appear on the display. "PL" will appear on
the display for two seconds every minute.
• You may insert a tape. However, the VCR power will
remain off.
• You may press
Recording is programmed or has finished).
• Timer Recording will take place as scheduled, even if
Parents Lock is activated. "P.L." will appear steadily on the
TV screen during the Timer Recording.
QUICK-FIND
This function enables you to search and confirm the contents
of the recorded programme(s) using the index mark.
• Use the remote control for this procedure.
• The tape must be fully rewound.
QUICK-FIND
1) Press
12
first, and then press
. To rewind the tape to the beginning of the
AUTO RETURN
AUTO RETURN
to turn on the VCR and then
AUTO RETURN
. In this case, if you press any
.
STOP
/
or
/
repeatedly to point to
B
K
C
L
F.FWD
g
STOP
/
or
/
to point to "AUTO
B
K
C
L
F.FWD
g
.
to turn on the VCR, then press
.
/I (STANDBY-ON)
on the remote control again for 5
EJECT O
to remove the tape (unless a Timer
.
PLAY
/
B
K
on the VCR.
on the VCR first. The
AUTO RETURN
,
/
.
B
/
.
B
on the remote
EN
Advertisement
Table of Contents
