Maxwell MW-1301 W Instruction Manual page 9

Take the chopped products out of the bowl
16.
(4).
Using the grating and shredding disc (10)
Before processor assembling make sure that
1.
the power plug is not inserted into the socket.
Set the attachment drive axis (3) on the motor
2.
unit (2).
Set the bowl (4) on the attachment drive axis
3.
(3) so that the handle of the bowl is on the
right of operation mode switch (1).
Turn the bowl (4) counterclockwise till clamp-
4.
ing.
Set the grating and shredding disc (10) on
5.
the attachment drive axis (3), facing the
appropriate blade side (shredder or grater)
upwards.
Set the lid (5) on the bowl (4) to the "UNLOCK"
6.
position so that the feeding chute (6) is on the
left of the handle of the bowl (4).
Set the lid (5) to the "LOCK" position turning
7.
it counterclockwise.
Insert the power plug into the mains socket.
8.
Select the operation mode using the switch
9.
(1):
"1" (low speed) - for mixing of liquid products;
"2" (high speed) - for processing of liquid and
hard products;
"P" ( pulse mode) - for processing of hard
products.
Note:
- To select the pulse mode turn and hold the
operation mode switch (1) in the position
"P".
Feed the processed products through the
10.
feeding chute (6) of the lid (5).
For products feeding use the pushers (7 or
11.
8) only. For "small products" feeding you can
use the small pusher (7) by taking it out of the
large pusher (8) and leaving the large pusher
(8) in the feeding chute (6).
After operation and before products remov-
12.
ing, switch the unit off by setting the opera-
tion mode switch (1) to the position "0" and
unplug the unit.
To remove the products take the lid (5) off
13.
the bowl (4) by turning it clockwise to the
"UNLOCK" position.
Take the grating and shredding disc (10) out
14.
of the bowl (4), holding it by the central part.
MW-1301.indd 9
Take the handle of the bowl (4), turn it clock-
15.
wise and take it off.
Take the chopped products out of the bowl
16.
(4).
Cleaning
ATTENTION! The blades of the chopping
knife (9) and the blades of the grating and
shredding disc (10) are very sharp and dan-
gerous. Handle the chopping knife (9) and
the grating and shredding disc (10) very
carefully!
Unplug the unit before cleaning.
–
Remove the lid (5) from the bowl (4).
–
Carefully take the chopping knife (9) or the
–
disc (10) out of the bowl (4).
Remove the bowl (4) from the motor unit (2).
–
Remove the attachment drive axis (3) from
–
the motor unit (2).
Wash all removable parts with warm water
–
and a neutral detergent, then rinse and dry.
Some products, for example, carrots or
–
beets, can dye the plastic removable parts.
Wipe the parts with soft cloth dampened in
vegetable oil, then wash them with warm
water and a neutral detergent.
Clean the unit body with a soft damp cloth,
–
then wipe it dry.
Do not use coarse sponges and abrasives to
–
clean the parts and body of the processor.
Do not immerse the motor unit (2) into any
liquids and do not wash it under water jet,
do not wash the motor unit (2), the bowl (4),
the lid (5) and the chopping knife (9) in a dish
washing machine.
Storage
Before taking the unit away for storage,
–
unplug and clean it.
Do not wind the power cord around the motor
–
unit (2).
Keep the unit away from children in a dry cool
–
place.
Delivery set
Motor unit – 1 pc.
Bowl - 1 pc.
Lid – 1 pc.
Small pusher – 1 pc.
9
ENGLISH
30.01.2013 15:07:09