Bluetooth - Audio - JVC KD-T922BT Instruction Manual

Bluetooth®
The connectivity result flashes on the display.
"PAIRING OK" and/or "HANDS-FREE OK"*1 and/or "AUD.STREAM OK"*2 and/
or "PBAP OK"*3: Compatible
*1 Compatible with Hands-Free Profile (HFP)
*2 Compatible with Advanced Audio Distribution Profile (A2DP)
*3 Compatible with Phonebook Access Profile (PBAP)
After 30 seconds, "PAIRING DELETED" appears to indicate that pairing has
been deleted, and the unit exits check mode.
• To cancel, press and hold B SRC to turn off the power, then turn on the
power again.
24 ENGLISH
JS_JVC_KD_T922BT_E_EN_3.indd 24 JS_JVC_KD_T922BT_E_EN_3.indd 24
Bluetooth — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
Press B SRC repeatedly to select BT AUDIO.
1
• Pressing enters BT AUDIO directly.
2 Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause Press the volume knob.
Press 2 J / 1 K.
Select group or folder*1
Press S / T.
Reverse skip/Forward skip
Press and hold S / T.
Reverse/Fast-forward
Press 4 B repeatedly.
Repeat play
[TRACK REPEAT], [ALL REPEAT],
[GROUP REPEAT]*1, [REPEAT OFF]
Press 3 A repeatedly.
Random play
[GROUP RANDOM]*1, [ALL RANDOM],
[RANDOM OFF]
*1 Depending on the connected device, some devices may not support this feature.
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
2/3/2020 2:54:33 PM 2/3/2020 2:54:33 PM