Input data
Output data
4.3
How to Configure Network by Delta CANopenBuilder Software
Using CANopenBuilder to scan the network
(1) Open CANopenBuilder software, as below:
(2) Select "Setup" => "Communication Setting" => "System Channel", and the "Serial Port Setting"
dialog box will appear.
(3) Set up the communication parameters in the PC and DVP-SV, e.g. the communication port,
address, baud rate and communication format.
COM Port
DVP-PLC Application Manual
CANopen Communication Module DVPCOPM-SL
D register
15 14 13 12 11 10 9
D6036
D6286
Item
COM port on the PC to be used to communicate
8
7
6
5
Multi-function digital output
Multi-function digital input
Function
4
3
2
1
0
Default
COM1
11