Related Manuals for USX-MOUNT XAS404-1
Summary of Contents for USX-MOUNT XAS404-1
- Page 1 XAS404-1 INSTRUCTION MANUAL For 13-27" TV If you have any questions along the way, just give us a call 1-800-460-0956 or mail to customerservice@x-mount.com. We’re ready to help!
- Page 2 Before getting started, let’s check below lists to make sur e it is just right for you! MAX:100mm/3.94" (MIN:50mm/1.97") Check your monitor No? This mount is NOT compatible. VESA is within MAX:100mm/3.94" (MIN:50mm/1.97") Min and Max size Yes? Perfect ! CAUTION: DO NOT exceed the maximum weight Does your monitor indicated.
-
Page 3: Front View
FRONT VIEW FRONT VIEW 100mm [3.94in] 93mm [3.66in] 100mm [3.94in] 399mm [15.70in] 92mm [3.62in] SIDE VIEW SIDE VIEW SIDE VIEW ±90° +45° ±360° -45°... - Page 4 WARNING:This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. Never use damaged parts! NOTE: Not all hardware included will be used. Parts and Hardware for Monitor Installation Washers TV Screws M4x12mm...
- Page 5 Parts and Hardware for Monitor Arms Assembly -Pole x1 -Pole folder x1 -3mm Wrench x1 -5mm Wrench x1 -M5x15 Bolts x3 -Clamping Fastener x1 -Fastener x1 -Rubber Mat x2 -M10x100 Handle X1 -Round Fastener x1...
- Page 6 Pole Unit...
- Page 7 2A-1 Assemble Pole Unit with Clamping Fastener Use wrench to screw the clamping fastener to the pole by tightening the bolts Put the glued side of the rubber mat to the upper side of the clamping fastener Pole Unit Pole Unit-A...
- Page 8 2A-2 Assemble Pole Unit-A on Desktop Fasten pole unit-A on the desktop. Pole Unit-A MAX:3.85" Desktop MIN:2.87" Fasten...
- Page 9 2B-1 Assemble Pole Unit with Round Fastener Use wrench to screw the round fastener to the pole by tightening the bolts Put the glued side of the rubber mat to the bottom of the round fastener Pole Unit Pole Unit-B...
- Page 10 2B-2 Assemble Pole Unit-B with Desktop Put pole unit-B to the hole on the upper desktop. Use Handle to tighten fastener and pole Unit-B fully. Pole Unit-B diameter of the hole Fully Tighten 0.4-2.5” Desktop Fasten...
- Page 11 3-1 Assemble Monitor Connection with Monitor Choose the suitable bolts and washers according to the diameter of the hole at the back of the monitor . Monitor Connection...
- Page 12 3-2 Connect the Monitor Connection and Fixed Assembly Use the wrench to fasten or loosen the bolt to adjust the height of monitor connection. ① Fully fasten bolt when finish. Tighten Monitor...
Need help?
Do you have a question about the XAS404-1 and is the answer not in the manual?
Questions and answers