Commands And Events - TAIYO YUDEN EYSKJNAWB-VX Manual

EYSKJNAWB-VX

5.5.3 Commands and Events

The following commands are available during connection when the EYSKJNAWB-VX is in command
mode.
以下のコマンドは、EYSKJNAWB-VX とデバイスがコマンドモードで接続中に利用できます。
Code Description
SEND Send up to 20 bytes of data to the connected peer
接続したペアリングデバイスにデータを送信
DCON Terminate an established connection
接続状態から切断
DLEN Get the number of bytes that can be sent
送信可能な Byte 数を取得
The following events can be generated while the EYSKJNAWB-VX is connected and notifications are
enabled on the peripheral device.
EYSKJNAWB-VX が接続状態でペリフェラルの notifications が有効である間、以下のイベントが出力
されます。
Code Description
MODE Event notifying that the mode has changed (C=Command, T=Through)
モード変更のイベント表示
BTTX Event notifying that a packet sent with SEND has been transmitted
送信完了のイベント表示
BTRX Event notifying that data was received from the peer device. The number of bytes
will be provided along with the data
受信後のイベント表示
TAIYO YUDEN CO., LTD.
3-Sep 2021 Ver.0.91
TAIYO YUDEN CO., LTD.
59/198