Dell S300 User Manual page 42

NETWORK
The Network menu allows you to configure the network connection settings.
DHCP A —If a DHCP server exists in the network to which the projector is
DDRESS
connected, the IP address will automatically be acquired when you select DHCP
On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use
to select the number of IP Address, Subnet Mask, and Gateway. Key in
Enter to confirm each number and then use
IP A —Automatically or manually assigns the IP address to the projector
DDRESS
connected to the network.
S M —Configure the Subnet Mask of the network connection.
UBNET ASK
G —Check the Gateway address with your network/system administrator if
ATEWAY
you configure it manually.
DNS—Check the DNS Server IP address with your network/system administrator
if you configure it manually.
S —Press
to save the changes made in network configuration settings.
TORE
NOTE:
1 Use and
Store.
2
Press the
the value. (The selected option is highlighted in yellow)
a
Use
b
Use
c
After the setup is complete, press the
3
After the IP Address, Subnet Mask, Gateway and DNS is set up, select Store
and press the
42 Using Your Projector
button to select IP Address, Subnet Mask, Gateway, DNS and
button to enter IP Address, Subnet Mask, Gateway or DNS to set
and button to select the option.
and button to set the value.
button to store the settings.
to set the next item.
button to exit.