17
Menu
18
Mute
19
Zoom +
20
Zoom -
21
Volume up
22
Volume down
23
Freeze
24
VGA
25
Source
26
Auto Adjust
Press to activate the OSD.
Press to mute or un-mute the projector speaker.
Press to increase the image.
Press to decrease the image.
Press to increase the volume.
Press to decrease the volume.
Press to pause the screen image, then press "Freeze"
again to unfreeze image.
Press to choose VGA source.
Press to switch between Analog RGB, Composite,
Component (YPbPr, via VGA), HDMI, and
S-Video source.
Press to synchronize the projector with the input
source. Auto Adjust does not operate if the OSD is
displayed.
Using Your Projector
29