Table of Contents
Advertisement
Cleaning and Maintenance
Installation Maintenance.The operator has to make sure that the unit is operating safely and has the installations and electronics
checked by an expert every 2 years.
The following points must be considered during the inspection:
1)All screws used for installing the device or part of the device have to be tightly connected and must not be corroded.
2) There must not be any deformations on the housing, fixation and installation spots (ceiling, suspension, trussing).
3) The electronic power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments. Further
instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be
removed.
4) Fixture must only be cleaned from the outside using only soap and water.
Note: There are no serviceable parts inside the device. Maintenance and service operations are to be carried out by authorized
dealers.
Replacing the fuse: When possible, only replace the fuse with the same type and rating.
Replacing the power cable: If the power cable of this device becomes damaged, it has to be replaced by authorized dealers or
trained professionals only.
Should you have further questions, please contact your dealer.
7
Advertisement
Table of Contents
