Advertisement
INSTALLATION
1
Using the mounting template or the mounting bracket itself, mark and drill the necessary holes on the mounting surface.
2
Secure the mounting bracket to the mounting surface using the screws and anchors included. Use the mounting pad
between the bracket's arm and mounting surface as needed.
3
To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included
with the camera.
NOTE:
Do not touch the lens when handling the camera module.
4
Pass wires through and make all necessary connections.
5
Secure the camera to the mounting bracket using the included screws.
Rev Date: 07/21
2. Installation
Quick Start Guide
A ach the Mount Pad an
1
the wall.
Connect the cable.
2
A ach the camera bo om
3
hole.
A er adjus ng the camer
4
upper case to complete t
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
Advertisement
